|
Lambda Americas
announces the GenesysTM 1U now with Multi-Drop and Advanced
Parallel Operation.
NEW Genesys™ Advanced
Features
Advanced Parallel Operation |
Standard Feature |
|
Global Commands |
Standard Feature |
|
IEEE Multidrop Master |
Optional Feature |
|
Multidrop Slave |
Optional
Feature |
These new features and options, standard in the GenesysTM 2U 3.3kW, are now
available in the GENH Half Rack 750W and GEN Full Rack 750W and 1500W
Series.
NEPTUNE, N.J. (May 2006) - Lambda Americas Inc.
announces its world class GenesysTM 1U programmable DC power
supply is now available with Multi-Drop and Advanced Parallel Operation
These new features and options, standard in the GenesysTM 2U
3.3kW, are now available in the GENH Half Rack 750W and GEN Full Rack 750W
and 1500W Series.
Advanced Parallel operation allows the user to set up to four power
supplies to operate in parallel Master/Slave. The Master accepts commands
for the total current being requested, controls the Slaves and reports
total current being delivered by the group as if it were one power supply.
Total current is displayed on the Master Front Panel or Master Analog
Remote Monitor.
Global Commands and Single Byte Commands simplify
programming and provide faster test sequence execution.
Before Global Commands, to address ten power supplies, the user
would have to issue an address and PV 5.00 ten times, once for each of the
ten supplies. With Global Commands, a single command, GPV 5.00, addresses
all supplies on that bus.
Without Single Byte Commands, a command to Dump (6) Status
Registers can take up to 300mS. With a Single Byte Command, it takes under
10mS. These features reduce bus traffic which allows more instruments on
the same bus. This is extremely important as test systems grow larger.
Optional IEEE Multi-Drop (IEMD) Interface can provide significant cost
savings by eliminating the need for a GPIB Interface in every power supply
when used as a Master communicating with Multi-Drop Slaves (MD Option).
The IEMD Master communicates with up to 30 RS-485 Multi-Drop Option
equipped Slaves. In addition to saving interface hardware cost MD also
saves multiple IEEE addresses, which can be very important in large test
systems.
Optional Multi-Drop Slaves (MD), in addition to accepting commands
from an IEMD Master over RS-485, have advanced capability when used in
RS-485 mode even without an IEMD Master. The MD Option units provide
enhanced RS-485 functionality such as the ability to generate Service
Requests (SRQ) in Master/Slave Mode.

Product Links
Gen 1U Half Rack 750W
Gen 1U Full Rack 750 and 1500W
Gen 2U 3.3kW
Lambda Americas, Inc. is a leading manufacturer of precision, high
power and high voltage AC/DC power supplies.
Lambda Americas, Inc. headquartered in Neptune, NJ is
a world leader in standard power supply solutions such as AC-to-DC power
supplies, converters and accessories. Lambda's products are found
throughout the world, powering high-tech telecommunications, data
communications, computing/electronics, office and industrial systems.
Lambda is a unit of TDK Corporation (NYSE:TDK) a leading global
electronics company.
For information contact: John Breickner Product Manager - Low Voltage
Products +1-732-922-9300 x230
John.Breickner@lambda.com


© Copyright 1999-2008 Lambda Americas Inc.
All rights
reserved. Legal
Information
|