|
This series of high voltage switching power
supplies is designed to quickly charge capacitors and
pulse forming networks in lasers and general modulators.
Advanced semiconductor technology combined with high
quality construction, yields an exceptionally small and
reliable power supply which has set the industry standard
for many years. With many standard features and options,
this series is useful in a wide variety of OEM and
laboratory applications. Designed for continuous use in severe
electrical environments, these air cooled power supplies
provide an average charging rate of 8kJ/sec over
nine output voltage ranges from 1kV to 50kV, with either
positive or negative output polarity. Output control and
status monitoring are easily accomplished with the
standard remote interface or the optional front panel
controls. |
AC Input
208 VAC or 400 VAC, 3 phase, 50/60
Hz.
(Please specify at the time of order).
Average Charging Rate
8000 J/s at rated Output Voltage.
Peak Charging Rate
9000 J/s at rated Output Voltage.
Standard Voltage Ranges
1, 1.5, 2, 3, 4, 5, 6,
10, 15, 20, 30, 40, 50 kV.
All models continuously variable from 0 to 100% of rated voltage output.
Linear to within 1% of full scale. Accuracy 1% of rated.
Polarity
Available as fixed Positive or
Negative, Please Specify.
High
Voltage Assembly
Oil Insulated HV section (Air available on
limited models - call factory)
Output
Connector/Cable
| Output
Voltage |
Connector |
Cable |
| 1-30kV |
Proprietary |
DS
2124 |
| 30-50kV |
Proprietary |
DS
2024SSJ |
1-6kV
(Air Option) |
Amphenol
HN |
RG-8/U |
Input
Connector
VDE, UL, CSA, approved.
Power
Factor
Passive PFC 0.85 min
Efficiency
Better than 85%
Stored
Energy
Less than 0.3 Joules all models.
|
Stability
0.2% per hour after 1 hour
warm-up.
Pulse to
Pulse Repeatability
+/- 2% to 1kHz. For higher repetition rates,
consult factory
Temperature
Coefficient
100 PPM per oC
Ambient
Temperature
Storage: -40 to +80 oC
Operating:0 to +45 oC
Humidity
10-90% Non-condensing
Protection
The power supply is protected against open
circuits, short circuits, overloads and arcs.
Agency
Approvals
Certification to EN60950 (pending)
Mechanical
19"(482mm) x 17"(432mm) x 8.75"(222mm)
Click here for details
Accessories
- Detachable 10 foot HV cable
- Operating manual
Remote Control
Via 25pin d-type connector on rear panel. Click
here for details
Options
| Suffix-RFI |
Optional
external filter which reduces conducted emissions. (400VAC only) |
| Suffix-5V |
0 to
+5 volt program (0 to full-scale output) |
| Suffix-CT |
Optional
internal contactor for OEM only (standard on L/S
models) |
|
