|
The GenesysTM family
sets a new standard for flexible, reliable, AC/DC power systems in OEM,
Industrial and Laboratory applications.
|
● High Power
Density |
● Power Factor
(typ.) 0.99-1Φ, 0.94/0.88-3Φ |
|
● Output up to 600VDC or
1,000A |
● Advanced Parallel Master/Slave |
|
● Inputs -Worldwide
AC inputs |
● Built In RS-232/RS485 Interface
is standard |
The GenesysTM
product family of programmable switching power supplies provides high power
density, low ripple and a complete set of user-friendly interfaces. Range
available from the hugely popular 750W, 1U Half Rack and 750W or 1500W, 1U
Full Rack, 2U 3.3/5kW, and 3U 10/15kW it continues the advanced, high-density series of
AC/DC, rackmount, programmable power supplies. Outputs available range up to
600V and 1,000A. In addition to saving space, GenesysTM
power supplies contain extensive standard features that provide a new level
of performance and flexibility in high power Communications applications.
In addition to high power
density, popular worldwide single and three phase inputs are available. They
feature Active Power Factor Correction of 0.99 typical at full load with the
single-phase input and 0.94 typical with three phase inputs. This assures
operation in difficult AC environments and meets European EMC requirements.
The user-friendly front panel provides reliable control through encoders
selectable for fine or course adjustment and four digit LED Voltage and
Current meters. Adjustable OVP, UVL and Current Foldback provide further
flexibility. Their set values may be previewed on the front panel display
with Output ON or OFF. The Foldback may be set to latch output OFF if
desired for safety.
New Feature - Advanced
Parallel
Also included in this family are several important new features and options.
Up to four like units may be connected in parallel and user configured for
the Master to Program, Monitor and Display the total current of the group.
Thus, four units can appear as a single power supply up to 60kW,
increasing flexibility for system designers.
New Interface Option -
Multi-Drop
GenesysTM
family's new Digital Option called Multi-Drop allows an IEEE Multi-Drop
Master to control Multi-Drop equipped Slaves over RS485, avoiding the cost
of a GPIB board in every slave power supply. Up to 31 Slaves may be
addressed via the RS485 Input Lines.
Significant safety features include Safe Re-Start and Last Setting Memory.
With Safe Re-Start, the user can select whether the GenesysTM
power supply returns to previous settings after power off, or returns to
zero (safe) output, waiting for user instructions. Last Setting Memory
retains settings of output voltage and current, remote or local mode, OVP
and UVL, Foldback, Baud Rate and Start Up Mode, without battery. Front Panel
controls also include Output On/Off and Local/Remote selection. The Front
Panel may be locked locally or by software command.
All GenesysTM
products include standard, embedded 16-bit RS232/RS485 digital interface.
Through this digital interface up to 31 power supplies may be controlled in
daisy chain over the RS485 line. Analog remote programming is user
selectable 0-5V or 0-10V via DIP switches on the rear panel.
The design of GenesysTM
power supplies is highly modular to offer short lead times. SMT technology
provides high reliability.
Digital and isolated analog interfaces are optional. The optional IEMD
digital interface is IEEE488.2 & SCPI compliant. Labview Drivers are
available. Isolated analog programming options include either 0-5V & 0-10V
or 4-20ma control.
Lambda Americas, Inc. is a leading manufacturer of precision, high power and
high voltage AC/DC power supplies.
To put this flexible power technology to work for you, please click below.
|
